Flange Belt
Flange Belt

Stainless Steel 316L flange belt has Molybdenum in them which enables them to resist corrosion caused by Chlorides. This is one of the most important reasons that SS316L flange belts are used in highly corrosive environments, such as near sea shores for flange spray protection. SS316L flange belt is highly resistant to acid, solvents, chemicals and prevent metallic contamination of process liquids. The flange belt is zero maintenance, reusable and reduces fire hazards. Flange belts also come with an optional drainage or leak detection nozzle.


Cui is a specially intense form of localized corrosion that has been plaguing chemical process industries. Corrosion under insulation (cui) is any kind of corrosion that happens due to a moisture buildup on the outside surface of insulated equipment. The accumulation can be as a result of one in every of multiple factors that are distinct below. The corrosion itself is maximum typically galvanic, chloride, acidic, or alkaline corrosion. If undetected, the outcomes of cui can lead to the shutdown of a process unit.It's cost effective to prevent cui than to repair or replace damaged equipment. The handiest technique of stopping cui is to prevent water and electrolytes from getting into contact.


Feel free to ask us for quote or a Pricelist of PTFE Flange Guard: info@indanasteel.com


Our flange belt has been designed to handle pressure upto 2500 PSI and comes with a two year replacement Guarantee. These Flange belts have multiple slots for easy fitment to the flanges and takes less then a minute to fit. During maintenance flange belts can be removed as per requirement and on completion can be refitted. Can be used on both square and round flanges.

For any requirement of the best quality SS flange belts, please Contact us and get a quote in 1 hour from us

Download the catalogue